How to Pop a Wheelie on a Motorcycle by KingsMotorcycleFairings.com

You know how to ride a motorcycle, but do you know how to pop a wheelie? A wheelie is one of the most famous bike stunts to execute for riders and for spectators to witness. To some riders, performing stunts on a motorcycle can be extremely intimidating (which it should be, since they can be dangerous). However, with proper guidance and control you can learn how to perfect the skill of a wheelie over time in a safe way. Now, there are a number of different variations and techniques to performing a wheelie, so to start, our team at Kings Motorcycle Fairings highly recommends learning how to first master the most basic, “power wheelie”!

Before you start

Motorcycle stunts, including the power wheelie, can be very dangerous, so we highly recommend learning this stunt only if you are already an advanced or experienced motorcycle rider and by doing so in a secluded and safe area. We also want to emphasize the importance of wearing a motorcycle helmet & protective gear at all times when riding, but especially when learning a new skill on your sport bike. In addition to the regular protective gear you consistly wear on the street, it certainly wouldn't hurt to be extra precautious by adding a little extra gear (such as knee pads, elbow pads and even ankle pads). Just like learning to ride a bicycle for the first time as a kid, it is likely that you will be falling frequently before you get the hang of it. 

Step 1

Put it in 1st gear! Power wheelies are much easier when starting off in first gear, it's all about using acceleration to assist the bike in pulling the front wheel upward. The main objective to learning how to perform a wheelie is finding the right speed. We recommend starting the learning process by using speeds no higher than 10-15 mph. Going too slow can result in not having enough force to pull your front wheel upward. Going too fast can result in loss of control and can quickly put you in an unsafe situation. The key is to find a constant speed in-between 10-15 mph that will allow you to successfully find your balance point. Once you have found a good speed, you are ready to take on step 2!

Step 2

When you are ready, drop your speed and then open up the throttle and accelerate! This will help give you more power and a kick when you hit the gas. As you are doing this, pull the front wheel of your bike upward. If you feel as if you are going too far back, slightly hit the back brake to prevent yourself from flipping backwards. When you hit the rear brake, keep in mind that this action will cause your front wheel to come back down, so it's very important to land your front wheel as straight as possible. If your front wheel does not land straight or you land too suddenly, it can cause your bike to shake on impact resulting in a crash and possibly injuries. 

Step 3

This step is about maintaining your balance during the power wheelie. When your front wheel is in the air it is important to find your balance point in order to be in the wheelie for a longer period of time. Lean back on the rear side of the bike, making sure the balance point of you and your bike is in the center. Pro Tip: Any sudden tipping forward or backward can interrupt your point of balance and result in the bike tipping over and damaging your motorcycle fairings (breathe & remain calm).

 

Step 4

When you are ready to end the wheelie, use your rear brake (like we mentioned earlier) to bring the front end of your sport bike back down to the pavement. Again, keep in mind that you will want to hit the brake slowly to ease your way back down. When you hit the brake too hard it can cause you to lose control resulting in you and your bike falling over. Pro Tip: You can slightly increase your throttle as the front end is coming down to help balance out your movements.

Lastly, motorcycle wheelies are an extremely fun but dangerous aspect of motorcycle riding. It is very important that you remember to be extremely aware of any other vehicles on the road and be personally safe by wearing your motorcycle helmet & protective gear. Kings highly recommends that you always practice in a secluded area free from other vehicles!

The team here at KingsMotorcycleFairings.com hope that you found this article helpful. If you have extra time, we’d love for you to visit our online store for the largest selection of quality Motorcycle Fairing Kits, Helmets, Gear & Accessories!

How To Hand Wax Your Motorcycle by KingsMotorcycleFairings.com

Before we dive into “how to wax your motorcycle”, our team at KingsMotorcycleFairings.com wanted to share with our readers what makes waxing your bike so important. Well, waxing your motorcycle is one of the most cost efficient ways to keep your sport bike in tip-top shape! It's easy to assume waxing is done just for aesthetics, however a layer of protective wax can significantly help keep your bike both dirt and dust free while enhancing the natural shine of your fairings! In addition to waxing being very beneficial for your bike, it can also be a fast and easy process once you get the hang of it.

How to prepare

Prior to waxing, you’ll want to ensure your bike is freshly washed and rid of any dirt, dust and debris. If you’re new to hand washing your motorcycle, or simply looking for some pro tips, please visit our previous blog article on “How To Wash Your Motorcycle”. Properly washing your motorcycle prior to applying the wax is crucial, because it will help reduce the chances of scratching your bike when applying the wax. Pro Tip: You’ll want to move your bike into a shady area, it’s never a good idea to wax in direct sunlight. The sun can cause the wax to essentially bake onto your bike making the wax very difficult to spread effectively.

What you'll need

• Microfiber cloths

• Motorcycle wax

• Microfiber applicator pad (this helps evenly distribute the wax for a better finish and typically comes prepackaged with the motorcycle wax you purchase)

It’s time to wax

Ok, now it is time to wax your freshly washed bike. First, grab one of your clean microfiber cloths and lightly wipe away any dust or dirt that may have settled. Next, grab your microfiber applicator pad and your motorcycle wax. Apply a quarter size amount of wax directly to the applicator pad. Trust us, a little wax can go a long way and adding too much wax at once can make the process less manageable and messy (plus, you can always add more wax during the process if you feel it is necessary). Now when applying the wax, focus on one area at a time and lightly apply the wax with the pad in a circular motion. At first glance, you’ll likely notice a dull and cloudy residue being left behind, this is completely normal and all apart of the process as the wax thins out and dries. Once finished applying the wax across all of your painted motorcycle fairing pieces, simply let the wax sit and finish drying fully in a shaded area before starting the next & final step. 

Final step

You're almost done, congrats! Once the wax on your motorcycle has dried, take a clean microfiber cloth and start to thoroughly wipe the excess residual wax away. During this process you’ll start to notice the dull residue slowly disappearing, with some spots possibly needing a little extra elbow grease depending on the wax and how much was applied. After you have finished wiping off the wax, take a step back and examine your bike for any wax marks, chunks or streaks you may have missed. If you discover a few dry areas on your bike that could have used a little extra wax, you can always go back and repeat the waxing process in that specific fairing section. That's it. Simple enough, right? You’re now ready to take your bike out on the road and show off the freshness!

The team here at KingsMotorcycleFairings.com hope that you found this article helpful. If you have extra time, we’d love for you to visit our online store for the largest selection of quality Motorcycle Fairing Kits, Helmets, Gear & Accessories!

What Is The Purpose Of Motorcycle Fairings? Whether you are riding a Honda, Ducati, Kawasaki, BMW, Yamaha, Triumph, Aprilia or a Suzuki motorcycle, fairings can in fact make a significant difference in how your bike will perform and look.

Most Popular Fairing Kit Colors By Brand + The Hottest Motorcycle Paint Colors for 2023! By KingsMotorcycleFairings.com

Are you in the market to purchase a new fairing kit? When choosing new fairings for your motorcycle there’s certainly a lot to consider. The team here at KingsMotorcycleFairings.com listed out some of the most popular fairing colors by brand, as well as our selection of the most popular motorcycle paint colors leading into 2023 to help you make your decision.

Yamaha

Blue is a very popular fairing kit color for the Yamaha brand sport bike. From the Yamaha R1, R3 or R6, it’s not surprising too see that riders gravitate towards the color blue. Blue is often associated with self confidence and freedom!

Honda

Orange you glad to see orange made the list! As for Honda, orange is one of the most purchased fairing kit colors we see ordered at Kings Motorcycle Fairings across the Honda family (CBR600, CBF600F, CBR900, CBR1000, CBR1100 and more). Orange is associated with positivity and energy. So if you ever are in need of an extra boost of energy, simply go riding!

Suzuki

For Suzuki, blue is a go-to color we see from our customers! Again, it’s not shocking blue is a favorite color amongst many sport bike enthusiasts. If you're wanting to stand out, don’t you worry! There are countless fairing kit options and variations of blue to choose from on our online store for the Suzuki GSXR600, GSXR750, GSXR1000, GSXR Hayabusa at KingsMotorcycleFairings.com.

Kawasaki

If you’ve been in the sport bike game for a while most of you know the iconic green paint color Kawasaki is so widely known for across the ZX6R, ZX9R, ZX10R, ZX12R, ZX14R and more. In 1969, Kawasaki was the first brand to introduce lime green to the race tracks. The color was such a hit, it is still to this day one of the most popular fairing kits color schemes for the brand today! 

Ducati

There's just something extraordinary about a red Ducati! Red is a highly selected fairing kit color we see at Kings Motorcycle Fairings for the Ducati brand. It could easily be such a popular color because of the fierceness red brings to the road and its representation of speed... making it is such a legendary color associated with the Ducati brand (Ducati 748, 749, 848, 899, 916, 996, 998, 999, 1098, 1198, 1199 and the Monster line).

BMW

White, Red and Blue…for BMW that is!.. We see the colors white, red and blue as one of the top ordered fairing color combos for BMW S1000RR motorcycles. If you're looking for a color scheme that adds class, sleekness and sheer power to your bike then white, blue and red is the way to go!

Triumph

Pearl White is one of the top selected colors we see ordered here at Kings Motorcycle Fairings for our Triumph customers. If you're looking for a timeless, more versatile and modern fairing kit look, then pearl white is a great option for you and your Triumph Daytona!

Aprilia

It’s not very surprising that the color black made our list of most popular fairing kit colors. The sleek sophistication that black fairings add to your sport bike is simply unmatched! Whether it’s gloss black, matte black or a combination of both paint techniques, our Aprilia customers absolutely love black!

 

 

KingsMotorcycleFairings.com's Most Highly Anticipated Fairing Kit Colors for 2023

Hot New Trending Motorcycle Paint Colors & Designs for 2023

• Nardo Gray, Neon / Hi-Viz Yellow, Pearl White, Matt Black, Camouflage, Matte Army Green, Candy Red, Gold, Turquoise Blue, Matte Gray

Looking for Custom Fairings? Please email us at Support@KingsMotorcycleFairings.com

The team here at KingsMotorcycleFairings.com hope that you found this article helpful. If you have extra time, we’d love for you to visit our online store for the largest selection of Motorcycle Fairing Kits, Gear & Accessories!

 

The team here at KingsMotorcycleFairings.com wants to take a moment to share a few pro tips on how to execute a successful launch and help ensure you can avoid the public embarrassment of a stall again in the future!